|
|
|
|
How to use USB Flash Security
|
|
Basic of how to use "USB Flash Security[+none]-[#]" will be explained in this page.
The explanation in this page is "USB Flash Security"[+none] that run in the Vista.
The screen and operation maybe different in different edition of "USB Flash Security" and Windows service pack. Please understand it beforehand.
Please confirm the regulation for using before download software.
|
- You can download the Flash Security from homepage.
Please click the link of the download.
<-Click here to download [Version +none] of the USB Flash Security.
- Please click the botton [Save],when the window of [Download File] is dispalyed.
- Please click the botton [Save],when the window of [Save As] is displayed.
- Download completed,when the window of [Download Complete] is displayed.
If you want to go on installing,please click the botton[Open the file] or [Open the folder].
If you want to finish it without installation,please the botton [Close].
- Install the Flash Security to PC.
Please open the compression (zip format) folder which you downloaded.
- Please open the compression folder which in the zip file.
- There are 3 text files(Readme-*.txt) and Windows installer file (UsbEnter_Setup.exe) in the folder, please carry out the installer file.
- If a warning window of security is displayed,please click the botton[Run].
- When the window of [Welcome to the USB Flash Security Ver.1.3.3 setup wizard] is displayed,please click a button[next].
- Please check the License Article, and if agree the contents in the License Article turn on a check in [Agree], and click the botton [Next]. If not click the botton [Cancel].
- When the window of [Confirm Installation] is displayed,click the botton[Next].
- When the window of [Installation complete] is displayed.Click the botton[closed].
A shotcut will be created on desktop and in start menu.
- Install the Flash Security to USB flash drive.
Please start the [Flash Security] that installed in the PC.
- If the following screen is displayed, please click the button[OK] after confirming explanation about [USB Flash Security].
After turning on a check in [Next time,this screen is not displayed.],It will not be displayed next time.
- It is the main screen of [USB Flash Security].Please install the USB flash memory in the PC.
- If the drive of USB flash memory is displayed,pleasd choose the drive,and click the botton[Install].
- Data will be deleted by [USB Flash Security] be installed in USB flash memory.
If data is necessary,please click the botton[Cancle].
Please click the button[OK],if it may be deleted.
- The screen of the password setting is displayed,please input the password and hint,than click the botton[OK].
- The screen that start of the installation is displayed, please click the button [OK].
- It is installed in the usb flash memory, please wait for a while.
- If the screen of [Installation complete] is displayed,please click the botton[OK].
- When installation to the USB memory is completed, autorun.inf and UsbEnter.exe are copied by USB memory.
- If it is installed normally,that the capacity of UBS Flash Memory is [0.00GB] will be displayed in the main screen of [USB Flash Security].
- If it is installed normally,that the capacity of UBS Flash Memory is [476KB] will be displayed in the property of UBS Flash Memory.
- Please install it after releasing USB memory once.
If a screen of the automatic practice is displayed,choose the releasing security] and click the botton[OK].
- If the screen of the cancellation tool is displayed, input the password that is set into the USB flash memory, and click the button[OK].
- If the screen of [Please wait] disappear without errors,USB Flash Security is released and the USB flash memory can be used.
- Please install it after releasing USB memory once.
Start Explorer, and choose [releasing security of the USB memory] in the menu which it is right-clicked of the drive of the USB memory.
- If the screen of the cancellation tool is displayed, input the password that is set into the USB flash memory, and click the button[OK].
- If the screen of [Please wait] disappear without errors,USB Flash Security is released and the USB flash memory can be used.
- Please install it after removing USB memory once.
Choose and start the file UsbEnter.exe in the USB memory by the explorer.
If the files in the USB memory are displayed by the explorer,there is an error during releasing security(Win Vista).When the the screen of releasing security is displayed,close the explorer.
- If the screen of the cancellation tool is displayed, input the password that is set into the USB flash memory, and click the button[OK].
- If the screen of [Please wait] disappear without errors,USB Flash Security is released and the USB flash memory can be used.
- It disables the [USB Flash Security] that is installed.And the USB flash memory can be used normally.
Plsase start the [USB Flash Security] that is installed in PC.And install the USB flash memory which installed the [USB Flash Security].
It can be disabled however the security is released or not.
- Click the [Disabled Security] in the operation menu.
- If the screen of the password is displayed, input the password that be set into a disk of the USB memoryand click a button [OK].
- If a confirmation screen is displayed, please click the button[OK].
- Please wait for a while during processing.
- The fllowing screen will be displayed,if processing is finsihed normally.Please click the botton[OK].
- It enables the [USB Flash Security] that is disabled by Disabled Security from the operation menu.
Plsase start the [USB Flash Security] that is installed in PC.And install the USB flash memory that is disabled by Disabled Security.
- Click the [Enabled Security] in the operation menu.
- If the screen of the password is displayed, input the password that be set into a disk of the USB memoryand click a button [OK].
- If a confirmation screen is displayed, please click the button[OK].
- Please wait for a while during processing.
- The fllowing screen will be displayed,if processing is finsihed normally.Please click the botton[OK].
- Copy the release tool into USB memory.
Plsase start the [USB Flash Security] that is installed in PC.And install the USB flash memory which installed the [USB Flash Security] and the security has not been released.
- Please choose [Copy of release tool] of the operation menu.
- The fllowing screen will be displayed,if the release tool is copied normally.Please click the botton[OK].
- It is uninstalled [USB Flash Security] from PC that is installed in USB flash drive.
Plsase start the [USB Flash Security] that is installed in PC.And install the USB flash memory which installed the [USB Flash Security].
It can be uninstalled however the security is released or not.
- Please choose [Uninstall] of the operation menu.
- All the data in the USB flash memory will be deleted by uninstalling the [USB Flash Security].
If the data necessary,click the botton[Cancel].
Please click a button [OK], if it may be delete.
- The fllowing screen will be displayed,if processing is finsihed normally.Please click the botton[OK].
- When the [USB Flash Security] is uninstalled from the USB flash memory,the full capacity of the USB flash memory will be displayed by the main screen of the [USB Flash Security].
- It is uninstalled [USB Flash Security] from PC that is installed in PC.
Please click Control Panel from the Start Menu.
- Please click add or Release Programs from the Control Panel.
- Choose [USB Flash Security] and click the botton[delete] by the add or Remove Programs.
- If the confirmation screen of the add or Remove Programs is displayed,click the botton[OK] to uninstall the [USB Flash Security] from PC.
|
|
|
|
|
